• 2022-01-21

OM5 optic cables utilize the latest technology in the networking industry. These cables were specifically designed to handle high-speed data center applications and can transfer up to 100gb of data with ease. SZOPT has the latest standard in OM5 optic cables, widely applicable for FTTH cabling system. With the technology introduced to OM5 cables, the wavelengths increase each fiber's capacity by a...

• 2022-02-10

AOC,is the short form of active optical cable,which has modules at either end of an optical fiber cable that allows direct communication between devices over that permanently attached fiber cable. Both ends have specific connectors and the cable length is fixed.   This AOC cable, unlike traditional optical transceivers, is permanently attached to the transceivers at either end. This both prev...

• 2022-02-25

FTTA is a wireless site architecture where optical fiber is run all the way up the tower to replace much of what is traditionally completed with heavier coax cabling. Important components such as remote radio units (RRUs) are also positioned at the top of the tower instead of at the base location. In a FTTA configuration case, a baseband unit (BBU) situates near the bottom of the tower that c...

• 2022-03-10

MPO is the industry acronym for “multi-fiber push on.” These connectors have more than 1 fiber in a single ferrule and snap into place by a mechanical mechanism. There are many designs of MPO on the market for the various manufacturers. As with any type of connectivity product, the performance and cost of these vary considerably and some have distinct features that enable better “overlife” perform...

• 2022-03-24

The optical fiber unit of the ftth drop Cable is positioned in the centre.,and two parallel Steel Wire/FRP/KFRP strength members are placed at the two sides. The cable jacket is usually with a white or black LSZH sheath.SZOPT’s Ftth drop cables are usually with SM G657a fibers or custom with the following technical parameters: Technical Parameter: Fiber Counts O.D. Weight Tensile Strength Crush Re...

• 2022-04-15

Double-fly Self-supporting Drop Cable consist of four parallel FRP or KFRP as the strength members placed at the two sides. Then, the cable is completed with LSZH sheath. Such strucure has a much greater bandwidth to carry data and less susceptible to interference than common cables. With strengthen structure, water-resistant, soft and bendable characteristics, it’s easy to deploy and maintenance....

• 2022-04-18

A hybrid cable incorporates optical fibers and copper wires within the same jacket, and can supply power to devices while transmitting data. The 5G hybrid fiber optic and power cables incorporate both fiber and copper conductors in one cable. It contains two or more copper conductors that deliver DC power and optical fiber strands that deliver data to a remote device through one medium. A single c...

• 2022-09-02

SZOPT’s CPRI Pre-terminated cable solution provides a complete fiber optic interconnect solution for BBU/RRU base station. This solution offers the excellent cabling system with the fiber optic cable supplied on a portable reel. The design is especially suitable for FTTA environments where repeated deployment and retrieval for reuse is needed. For more information,please reach us for details.